 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
|
| Unit | TM-150H2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 5.70 | | Screw diameter | inch | 1.57 | 1.81 | | inch | 40 | 46 | | Normal indection capacity | in³ | 12.2 | 16.2 | | Injection rate | High Pressure | in³/sec | 9.0 | 12.0 | | High Velocity | in³/sec | | Injection pressure | High Pressure | psi | 27,971 | 21,145 | | High Velocity | psi | | Plastication capacity | oz/sec | 0.8 | 1.1 | | Screw revolution | rpm
min-¹ | 10 to 280 | | Nozzle pressing force | U.S.ton | 6.3 | | Hopper capacity | gal | 14.5 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Clamping system | - | Double toggle | | Clamping force | U.S.ton | 150 | | Clamping stroke | inch | 15.75 | | Min. mold height | inch | 5.91 | | Max. mold height | inch | 17.72 | | Tie-ble clearance (HxV) | inch | 18.11 x 18.11 | | Die plate size (HxV) | inch | 25.20 x 25.20 | | Ejector force | U.S.ton | 4.5 | | Ejector stroke | inch | 3.94 | | Others | | Heater capacity | kw | 7.2 | | Pump motor | kw | 18.5 | | hp | 25 | | Mold height adjust motor | kw | 0.2 | | hp | 1/4 | | Oil tank capacity | gal | 47.6 | | Machine dimensions(LxWxH) | inch | 177.9x46.1x77.2 | Main breaker
capacity | 230V class | A | 200 | | 460V class | 75 | | Power source capacity | KVA | 34 | | Power cable size | 230V class | mm²
(A.W.G*1 | 60 (2/0) | | 460V class | 22 (4) | | Machine Weighty | U.S.ton | 5.8 |
|
|
|
|
|
|
| Notes: | - Figures in are for the standard-sized screw.
- The figures are subject to change without any legal obligation on the part of the manufacture.
- *1 A.W.G stands for American Wire Gauge.
|
|
|
|
|
|
|
|
|
|
