 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
|
| Unit | TM-400H2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 12.05 | | Screw diameter | inch | 2.68 | 2.95 | 3.27 | | inch | 68 | 75 | 83 | | Normal indection capacity | in³ | 67.8 | 82.4 | 101.0 | | Injection rate | High Pressure | in³/sec | 23.4 | 28.4 | 34.8 | | High Velocity | in³/sec | | Injection pressure | High Pressure | psi | 25,397 | 20,875 | 17,050 | | High Velocity | psi | | Plastication capacity | oz/sec | 2.4 | 2.8 | 2.9 | | Screw revolution | rpm
min-¹ | 10 to 203, 10 to 260 | | Nozzle pressing force | U.S.ton | 8.7 | | Hopper capacity | gal | 33.0 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Clamping system | - | Double toggle | | Clamping force | U.S.ton | 400 | | Clamping stroke | inch | 27.55 | | Min. mold height | inch | 11.81 | | Max. mold height | inch | 29.52 | | Tie-ble clearance (HxV) | inch | 31.89 x 31.89 | | Die plate size (HxV) | inch | 41.34 x 41.34 | | Ejector force | U.S.ton | 10.6 | | Ejector stroke | inch | 6.30 | | Others | | Heater capacity | kw | 25.6 | | Pump motor | kw | 45.0 | | hp | 60 | | Mold height adjust motor | kw | 0.75 | | hp | 1 | | Oil tank capacity | gal | 132.0 | | Machine dimensions(LxWxH) | inch | 275.6x72.8x95.3 | Main breaker
capacity | 230V class | A | 30 | | 460V class | 150 | | Power source capacity | KVA | 84 | | Power cable size | 230V class | mm²
(A.W.G*1 | 100 (3/0) | | 460V class | 38 (1) | | Machine Weighty | U.S.ton | 17.6 |
|
|
|
|
|
|
|
| Notes: | - Figures in are for the standard-sized screw.
- The figures are subject to change without any legal obligation on the part of the manufacture.
- *1 A.W.G stands for American Wire Gauge.
|
|
|
|
|
|
|
|
|
|
